Rhino Hitch guide
Adjustable Trailer Hitch Maintenance
Updated 2026-10-20 · Rhino Hitch Inc · Facts checked 2026-10-20
Quick answer
Before each trip, check that pins and clips are seated and undamaged, the ball nut is tight and the ball isn't worn. Rinse off road salt and grit, let the hitch dry, and store it out of the receiver when you're not towing.
Before every trip
- Pins and clips are fully seated, straight and not cracked.
- The ball is tight on the mount and shows no flat spots or deep scoring.
- The receiver pin or lock is in place.
After towing in salt, mud or sand
- Rinse the hitch and pins with fresh water.
- Let it dry before storing.
- Clean grit out of the pin holes so pins slide in fully.
Storage
Removing the hitch when you aren't towing keeps it out of road spray and helps prevent theft.
When to stop and ask
If a pin won't fully seat, a part is bent or cracked, or the ball moves on the mount, don't tow. Contact Rhino Hitch.
Need new pins? See replacement pins and locks.
Questions
Frequently asked questions
Should I grease the ball?
Rhino Hitch hasn't published lubrication guidance. Follow your coupler maker's instructions.
How do I clean an anodized finish?
Rhino Hitch hasn't published cleaning guidance yet. Fresh water is the safe default.
Put it to work
Shop matching products
Sources